Industrial fans-Dust Collector
Industrial fans and radial fans are used as contractor devices in the discharge of smoky and dirty air. These radial fans consist of blades arranged in circular shapes at equal distances from the center. The transfer of dirty and clean air is achieved through these fans. These fans are also known as radial fans and centrifugal fans. They are manufactured and produced from black and stainless steel of appropriate thickness. They are also produced as dip galvanized under special conditions. Maximum efficiency and motor power are calculated by us. The correct calculation of the curves of radial fans varies according to the energy consumption of the business and the efficiency of the fan. They are manufactured as direct coupled or belt pulley driven with bearing housing according to the pressure and flow rate differences. They are manufactured up to a maximum pressure of 600 mmss from 900 m3/h to 160,000 m3/h. These fans constitute the vast majority of industrial fans. These fans resemble snail shells due to their structure. In these types of fans, air is taken from the center. Afterwards, the pressure is increased and transmitted from the wheel to the outlet channel. Especially industrial radial fans have high suction power. Thanks to this feature, it is one step ahead of all other fan classes.
SKU: EWA-TR-BUN-196-V2-4These fans are also frequently preferred and used as ventilation fans.
Another frequently used type among industrial fans is axial fans.
These fans are in the fan group where the fluid enters axially and leaves axially.
In such fans, it is produced from 3000 m3/h to 180000 m3/h up to a maximum pressure of 180 mmss.
Axial fans manufactured with low and high pressure are used in many businesses.
The most frequently used businesses are especially factories, ship warehouses, paint shops, foundries and other industrial branches.
Thanks to these fans used to clean smoke and dirty air, all the health and environmental conditions in the environment are eliminated.
Bunkar Makina is frequently preferred in this regard.
Axial fans are manufactured as dip galvanized upon request.
In principle, the desired capacity is reached by the rotor in a sleeve receiving its power and speed through the motor.
These fans can be selected as belt-driven and direct-coupled.
WHAT ARE INDUSTRIAL FANS? WHERE ARE THEY USED?
Industrial fans are frequently preferred in many businesses to evacuate smoke and polluted air.
High-pressure radial fans are frequently preferred in areas where high pressure and flow air is needed in a wide variety of industrial lines.
The selection of these fans, which reach very high pressures, is made according to the type of material and the process density.
Our production provides service from 1000 m3/h to 23000 m3/h up to 1200 mmss pressure.
Since there is more than one fan type, the areas of use of these fans vary according to the situation.
Axial fans are among the most commonly used fan types.
These fans are divided into two.
Fans used as ventilation and air conditioning are classified as propeller blade type.
The fan type used in low and medium pressure systems is the cylinder blade type.
These fans are also frequently preferred and used in the exhausts of drying and painting booths.
Another fan type is the guided cylinder type, which is used and preferred in large air flow rates.
Industrial fans vary according to the flow of air on the impeller and are used accordingly.
The smoke and polluted air that occurs in businesses, especially in industrial branches such as factories, first negatively affects the employees and then the environment.
Thanks to these fans that change the flow of air, the smoky and polluted air formed in the air is quickly and safely discharged from the environment.
These fans are a major factor in the proper rotation of the air in the air-conditioned environment.
Radial type fans also have more than one area of use.
These fans consist of a total of four sections in terms of their structure.
Forward curved bladed radial fans are especially preferred in low pressure ventilation systems.
They are preferred and frequently used by many businesses in home type hot air units, fan coils, packaged air conditioners.
Backward curved radial fans are one of the most preferred fans in general ventilation systems.
Non-inclined type radial fans are used for material transportation especially in industrial areas and are also frequently preferred in high-pressure air conditioning plants.
Aerodynamic blade type radial fans are frequently preferred and used in large air flow rates.
Industrial fans have many types and their areas of use are also different as we mentioned above.
As Bunkar Makina, we eliminate all the negative situations caused by smoky and dirty air.
Thanks to the ventilation systems and dust collection systems that we manufacture and produce in our own organization, we evacuate all the negative smoke and dirt that occur in all industrial areas and seriously threaten health, leaving its place to clean air.
The areas of use of industrial fans are as follows; Mining and Raw Material Sector, Paint Shops, Factories, Metal Processing Sector, Pharmaceutical Sector, Casting Sector, Wood Processing Sector, Chemical Sector, Agriculture Sector, Sandblasting Sector, Aviation Sector, Paper and Cardboard Sector and many more industries.
Another frequently used type among industrial fans is axial fans.
These fans are in the fan group where the fluid enters axially and leaves axially.
In such fans, it is produced from 3000 m3/h to 180000 m3/h up to a maximum pressure of 180 mmss.
Axial fans manufactured with low and high pressure are used in many businesses.
The most frequently used businesses are especially factories, ship warehouses, paint shops, foundries and other industrial branches.
Thanks to these fans used to clean smoke and dirty air, all the health and environmental conditions in the environment are eliminated.
Bunkar Makina is frequently preferred in this regard.
Axial fans are manufactured as dip galvanized upon request.
In principle, the desired capacity is reached by the rotor in a sleeve receiving its power and speed through the motor.
These fans can be selected as belt-driven and direct-coupled.
WHAT ARE INDUSTRIAL FANS? WHERE ARE THEY USED?
Industrial fans are frequently preferred in many businesses to evacuate smoke and polluted air.
High-pressure radial fans are frequently preferred in areas where high pressure and flow air is needed in a wide variety of industrial lines.
The selection of these fans, which reach very high pressures, is made according to the type of material and the process density.
Our production provides service from 1000 m3/h to 23000 m3/h up to 1200 mmss pressure.
Since there is more than one fan type, the areas of use of these fans vary according to the situation.
Axial fans are among the most commonly used fan types.
These fans are divided into two.
Fans used as ventilation and air conditioning are classified as propeller blade type.
The fan type used in low and medium pressure systems is the cylinder blade type.
These fans are also frequently preferred and used in the exhausts of drying and painting booths.
Another fan type is the guided cylinder type, which is used and preferred in large air flow rates.
Industrial fans vary according to the flow of air on the impeller and are used accordingly.
The smoke and polluted air that occurs in businesses, especially in industrial branches such as factories, first negatively affects the employees and then the environment.
Thanks to these fans that change the flow of air, the smoky and polluted air formed in the air is quickly and safely discharged from the environment.
These fans are a major factor in the proper rotation of the air in the air-conditioned environment.
Radial type fans also have more than one area of use.
These fans consist of a total of four sections in terms of their structure.
Forward curved bladed radial fans are especially preferred in low pressure ventilation systems.
They are preferred and frequently used by many businesses in home type hot air units, fan coils, packaged air conditioners.
Backward curved radial fans are one of the most preferred fans in general ventilation systems.
Non-inclined type radial fans are used for material transportation especially in industrial areas and are also frequently preferred in high-pressure air conditioning plants.
Aerodynamic blade type radial fans are frequently preferred and used in large air flow rates.
Industrial fans have many types and their areas of use are also different as we mentioned above.
As Bunkar Makina, we eliminate all the negative situations caused by smoky and dirty air.
Thanks to the ventilation systems and dust collection systems that we manufacture and produce in our own organization, we evacuate all the negative smoke and dirt that occur in all industrial areas and seriously threaten health, leaving its place to clean air.
The areas of use of industrial fans are as follows; Mining and Raw Material Sector, Paint Shops, Factories, Metal Processing Sector, Pharmaceutical Sector, Casting Sector, Wood Processing Sector, Chemical Sector, Agriculture Sector, Sandblasting Sector, Aviation Sector, Paper and Cardboard Sector and many more industries.
